Sump Pumps
RIW can offer a range of sumps, sump pumps, maintainable water management drainage channels and aqua alarms to compliment RIW Cavity Drain Membranes. Including sump pumps for lift shafts. These provide effective mechanical drainage solutions for all below ground structures where an RIW Cavity Drain system is being installed.
The drainage solutions are designed to be fully maintainable, as this is a requirement for Type C drained protection systems as outlined in BS 8102:2009, the Code of Practice for protection of below ground structures against water from the ground.
The RIW Aqua Pump Pro range of sump pumps and channel fittings has been developed specifically for the specification market and are specifically designed for the removal of ground water from a basement when used in conjunction with an RIW Cavity Drain System.
RIW Aqua Pump Pro
Comprises of a polyethylene sump, locking access cover and powerful submersible pump, the system is versatile enabling inlets to be located to meet the specification and the needs of the installers.
Quick and easy to install with a pump capacity of 132 litres / minute up to a head of 7m.
RIW AquaPump Pro Plus
Identical to the RIW Aqua Pump Pro Plus above but is supplied with two mains powered pumps.These can be plumbed to either a single discharge outlet or to two separate outlets from the sump.The second mains pump is located on the raised foot within the sump chamber andp rovides back up to the primary pump and additional capacity to the system if required.
Quick and easy to install with a pump capacity of 132 litres / minute up to a head of 7m.
RIW Aqua Pump Pro Battery Back-Up System (BBUPS)
Comprising of a polyethylene sump, locking access cover, powerful submersible pump, 24v back up pump and control panel. It is designed for use where primary pump failure through mechanical fault or loss of mains power would be catastrophic.
The system alerts the end user if the water rises above the normal operating level within the sump, and activates the backup pump via three separate float switches.
The panel contains two trickle charged batteries.
Quick and easy to install with a pump capacity of 180 litres / minute up to a head of 6.5m
RIW Control Panels and Alarms
High level water alarms and control panels to suit site specific applications are also available.
RIW Single Pump Monitor/Alarm
An integral high level audible/visual mains alarm, which is activated by the pump’s float mechanism within the sump.It also records each activation of the pump and length of run time of the pump, which is ideally suited where unknown levels of water ingress occur and also to monitor changes in levels of ingress between service intervals.
RIW Duel Assisted Control Panel
Where two mains powered pumps are located within one sump, the RIW Dual Assist Control Panel will alternate their operation and also activate both pumps simultaneously when required. Complete with integral high level water alarm and monitoring counters for each pump which record the number of activations and run times. This unit is designed for high risk areas of potential water ingress.
RIW High Level Alarms
To meet individual project requirements, RIW supplies a range of high water level alarms including 9v battery operated alarms, mains powered alarms, mains/battery powered alarms and dialler alarms (both BT landline and SMS versions). All include audio and visual indicators, mute buttons and independent float activation.