Products

Flexiseal 500 HG is a two-component, reactive, fast-curing, hand-applied waterproofing membrane which provides a continuous, tough and flexible seamless coating for roofs, podium decks, terraces and balconies. Flexiseal 500 HG is based on advanced resin technology.

Flexiseal Pro cures to form a seamless and fully bonded waterproof coating. It can be applied in one coat to horizontal areas and in two coats on vertical substrates, speeding up installation programs on fast track construction sites. Flexiseal Pro is a flexible but durable barrier to water and water vapour and is generally applied to substrates treated with Flexiseal Pro Primer. Flexiseal Pro is typically used where a high performance waterproof coating/tanking system is required.

DPM Red is a three-layer, low density polyethylene damp proof membrane with a polypropylene reinforcing grid.

FWM is typically used internally in wet areas, prior to the installation of ceramic tiles or stone material.

Cavity Drain R20 & R7 are used as internal cavity drainage membrane systems, to collect water entering the structure. Cavity Drain R20 and R7 are typically used in basements and sub-structures, to channel water ingress to a sump or collection point for disposal.

Double Drain is a cold applied, high density polyethylene profiled sheet, incorporating a permeable geotextile filter fabric, designed to prevent ground water reaching the structure.

Plaster Drain is an internal drainage membrane, used to channel water ingress to a sump or collection point for disposal or to separate new finishes from a damp wall.

Sheetseal 9000 DPC is a flexible polymeric damp proof course sheet material, manufactured from a mixture of thermoplastic polymers and additives.

MultiJoint is a closed cell, cross linked Ethylene Vinyl Acetate (EVA) copolymer waterproof foam, available in a wide range of sizes. The product is installed into joints using a two-pack, solvent free, modified epoxy adhesive, ie: MultiJoint Adhesive.

Cementfill FC is a single component, thixotropic, polymer modified, cement based waterproof repair mortar with high adhesive properties.

Cementfill HB is a single component, thixotropic, polymer modified cement based rapid hardening waterproof high build repair mortar.

Heviseal is a cold applied, bitumen based coating, which dries to form a uniform UV resistant and waterproof layer. The coating is a fibre and mineral filled solution of natural and petroleum bitumens in white spirit.

LAC® is a two coat cold applied bitumen based coating, which dries to a uniform gloss black finish, to provide both waterproofing and a barrier to radon.

Liquid GM is a single component water based compound, formulated on styrene-butadiene co-polymer.

Sheetseal 226 is a cold applied, high density polyethylene film, coated with a bitumen/rubber self-adhesive layer with a removable reinforced silicone paper.

Sealing Compound is a trowel-grade sodium bentonite/butyl-rubber based sealant, designed for use with Structureseal.

Cementflex is a two component, polymer rich and flexible cement based waterproof coating for concrete and masonry, with excellent adhesion to prepared substrates. Cementseal Primer is required for all horizontal applications, and is also used on porous surfaces, prior to applying Cementflex.

Sheetseal GR is a cold applied, high density polyethylene film, bonded to aluminium foil and coated with a bitumen/rubber self-adhesive layer with a removable reinforced silicone release paper.

Structureseal is a bentonite clay sheet waterproofing composite, comprising high swelling sodium bentonite encapsulated between a non-woven and woven geotextile.

Cementjoint is an advanced, elastomeric, highly tear resistant, breathable, composite waterproof tape. When embedded in Cementseal, it gives a highly flexible, impermeable seal over 'live' cracks and expansion/construction joints.

Toughseal is a solvent free polymer modified two-pack epoxy coating, available in two colours.

Waterstop is a sodium bentonite based hydrophilic type waterstop, designed to stop water infiltration through insitu concrete construction joints.

Cavity drainage systems are designed to be fully maintainable, as this is a requirement for Type C (drained) protection as outlined in BS 8102:2009 Code of practice for protection of below ground structures against water from the ground.

Cementseal is a two component, polymer modified cement based waterproof coating for concrete and masonry, with excellent adhesion to prepared substrates. Cementseal Primer is required for all horizontal applications, and is also used on porous surfaces, prior to applying Cementseal.

Gas Seal Black is four-layer loose laid, low-density polyethylene gas barrier containing an integral aluminium foil. This gas barrier protects the structure against hydrocarbon vapours, methane, carbon dioxide, radon and moisture from the ground.

Gas Seal HC is a 0.5mm thick, unique blended polyethylene membrane, for use where protection against ground gas and hydrocarbons are required.

DPM Blue is a three-layer loose laid, low-density polyethylene gas barrier. DPM Blue protects the structure against moisture and radon from the ground.

Structureseal GPT is a 1.5mm thick, unique blended polyethylene membrane with a bonded geotextile for pre-applied waterproofing applications, where ground gas or VOC protection is also required. It forms a mechanical bond to the external face of the concrete structure and complies with the latest BS8485, BS8102 and CIRIA C748 codes of practice.

KIM is a unique, single component, crystalline waterproofing admixture in powdered form which is added to ready mix concrete to produce water tight concrete or Type B protection as defined in BS8102:2009.

Krytonite™ Swelling Waterstop is a synthetic rubber waterstop that uses swelling pressure to seal concrete construction joints and stop water.

Krystol Waterstop Treatment is a cementitious crystalline slurry that is applied to horizontal and vertical construction joints to provide additional waterproofing protection, and protect rebar from corrosion.